Firecontrol Software

Danke Presonus für die tolle Unterstützung der Soundkarte. Die hat echt viel Geld gekostet und wird nicht mehr supportet. Na na…so funktioniert der Kapitalismus halt.

Deshalb hier die Lösung.

Erstmal alles bestehende von Presonus Firestation löschen:

  • MacHD/Applications/Universal Control
  • MacHD/Applications/FireStudio Control Console
  • MacHD/Applications/FireControl
  • MacHD/Applications/FireStudio Lightpipe Mixer
  • MacHD/Applications/StudioLive
  • MacHD/Library/Application Support/PaeFireStudio
  • MacHD/Library/Application Support/PreSonus
  • MacHD/Library/Audio/MIDIDrivers/PAEFireStudioMIDIdriver.plugin
  • MacHD/Library/Preferences/PaeFireStudio.startup
  • MacHD/Library/Receipts/PreSonusUniversalControl.pkg
  • MacHD/Library/Startup Items/PaeFireStudio
  • MacHD/System/Library/Extensions/PaeFireStudio.kext
  • MacHD/Users/YOUR USERNAME /Library/Caches/Juce/jucAppLock_Universal Control
  • MacHD/Users/YOUR USERNAME/Library/Caches/Juce/Universal Control
  • MacHD/Users/YOUR USERNAME /Library/Preferences/FireControlSettings.settings
  • MacHD/Users/YOUR USERNAME/Library/PreSonus

Remove .bom and .plist files

*If you’ve done the UC 1.7 uninstall script method above, and these files are not there, you can proceed with the next section.

Note: if you use OSX 10.11 El Capitan, 10.10 Yosemite, 10.9 Mavericks, 10.8 Mountain Lion, 10.7 Lion or 10.6 Snow Leopard, you also need to do the following:

a) Right Click the Finder

b) From the pop-up window select Go To Folder

c) Paste or type in this string:       /private/var/db/receipts

d) In the folder that opens, find the files that have Universal Control in the label and move them to the Trash.

You are looking to delete these entries (they will be at the bottom of the list):

com.presonus.pkg.universalcontrol.bom

com.presonus.pkg.universalcontrol.plist

Dann diese Anleitung durchziehen:

1: (Super important) Start with a clean install of OS X either 10.11.X (El Cap) or 10.12.X (Sierra)
This means wiping your current system drive or testing with a spare drive you have lying around. Either way you are going to need to start the OS install from scratch.

2: Once you have OS X installed then go out and download/install all updates for the OS. lets get these updates installed and out of the way of making our trusty Firestudio 26×26 the king on this system. Update/reboot…repeat until all OS X updates are installed.

*****Please do not install any DAW software or hardware drivers yet********

3: Here is the technical part but it is very simple if you follow the instructions. We are going to disable „SIP“ in OS X. This is the security feature that has been in OS X that keeps a lot of application and system files to not get install where they need to go.

Here we will disable SIP.
Restart your Mac.
Before OS X starts up, hold down Command-R and keep it held down until you see an Apple icon and a progress bar. Release. This boots you into Recovery.
From the Utilities menu, select Terminal.
At the prompt type exactly the following and then press Return: csrutil disable
Terminal should display a message that SIP was disabled.
From the  menu, select Restart.

***** Incase you want to re-enable SIP but you will not need to as it is the issue******
(You can re-enable SIP by following the above steps, but using csrutil enable instead.)

Boom, that pesky SIP is now disabled and we can start to install our great 26×26.

Plug in the 26×26 unit to your mac via firewire. Power on the unit once it is plugged in.
Now head over to the Legacy products of Presonus website and download the FireControl for Lion installer. (Fire Studio 26×26)

Run the Fire Control installer while the 26×26 in plugged in and powered on to the mac.
Reboot the when the installer is complete. Do not try to access Fire Control surface before the reboot.

After the mac has booted back up and you have your trusty 26×26 plugged in to the mac and powered on and the sync light on the unit is solid blue you can now open Fire Control.

If Fire Control surface loads up and you can see the status and faders/ins/outs of the 26×26 unit you are in the house!

From here you can now install your DAW of choice and then plugins and so on.

I have my old 26×26 running flawlessly on my mac pro 3,1 8 core running 10.11 (El Cap) doing just this process.

I have this also working on my mac pro 5,1 running 10.12 (Sierra) with this very process.

Cheers and happy hacking to keep this great old workhorse (NAYYYY….26×26) trucking along.

Quellen:

https://forums.presonus.com/viewtopic.php?f=160&t=22154&sid=f6fc1b2ba4e62378f0d43ed298c41148